Not all Go Direct sensors can be updated using the Go Direct Firmware Updater app.
Due to supply chain issues during the pandemic, we were required to build some sensors with different processors. Any of the sensors having an AMTEL processor can...
At Vernier Science Education, we aim to make our digital resources accessible to all users, including individuals with disabilities. We use the Web Content Accessibility Guidelines (WCAG) 2.2 AA as a reference point to guide improvements in accessib...
The following are the different versions of the Go Direct® Soil Moisture Sensor (GDX-SM) that we have sold. Only the most recent version, released in May 2025, supports Remote Data Logging. Because of hardware differences, sensors that do not su...
The following are the different versions of the Go Direct® Weather sensor (GDX-WTHR) that we have sold. Only the most recent version, released in March 2025, supports Remote Data Logging. Because of hardware differences, sensors that do not support...
Specifications and User Guide
Troubleshooting
General: Press the button on the side of the Go Wireless Optical Heart Rate once to power the sensor on. The green lights should begin to flash. Connect your sensor as described in the Ge...
This issue is specific to the Windows installed version of Graphical Analysis.This issue is most common when updating from v6.2.0 to v6.2.1.
What is Happening?
When using the update tool within the Graphical Analysis app, the update can fail...
This article is for Graphical Analysis version 6.2.0 or newer.For older versions of the app, see How do I activate Graphical Analysis Pro?
Activating Graphical Analysis Pro
Follow these steps to activate the pro features of Graphical Analysis ...
The new (May 2025) Variable Load has rotary switches to allow the user to set the resistance to any value from 2 to 200 ohms. It supports up to 300 mA of current, and it has a replaceable 365mA fuse that is 1.5 cm long. A spare fuse is included insi...
Go Direct® Turbidity (GDX-TRB)Specifications and User Guide
Troubleshooting
Primary Test: place a cuvette of distilled water in the sensor. It should read zero. If it reads anything else, check your cuvette for scratches or fingerprints.
...
The Ladder Experiment Kit (2DFP-LA) is designed to be used with the Go Direct® 2-Axis Force Plate (GDX-FP2D) or 2-Axis Force Plate (FP2D-BTA) to investigate reaction forces at work on a ladder. It is designed to use either the 1.2 or 2.2 m long ...