This information is for Android devices only. For iOS/iPadOS devices, see . Graphical Analysis—Go Wireless View in Google Play* * Note: a change in Google......
Please read the user manual for general usage: Specifications and User Guide TROUBLESHOOTING -Primary Test: Are you using Logger Pro v3.14, LabQuest App v2.7.2, or......
When a VCB2 is upgraded, the new switches are on a raised, smaller circuit board. We also place a small silver dot after the revision......
Stepper motors are great for projects and can easily be used with an Arduino and our . If you have a stepper motor and want......
Graphical Analysis on Android requires a minimum Android OS (see chart below), and an up-to-date Android System WebView. These are updated separately, so it is......
The mBot IR remote is designed to use a CR2025 3-volt coin cell battery. We have also used a CR2032 in that remote. The last......
Yes. You must use the LabQuest 2 or LabQuest 3 interface to control a line on the Digital Control Unit with a Go Direct (GDX)......
Specifications and User Guide Which Model DCU Do I Have? There have been three Digital Control Unit (DCU) models over the years. The current model......
The can be used with any DC electronic component or output device that requires only power and ground connections, such as an LED, buzzer, or......
The maximum number of wireless devices the LabQuest App can support is three of any one type of device, up to a total of six......