Pressure Sensor 400 (PS400-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the sensor to a Vernier interface and run the data-collection program. The units for the default readings are kPa and they sh...

The Rotational Motion Accessory Kit (AK-RMV) includes several discs for rotary motion experiments. Smooth discs: 1.05 x 10-4 kg m2Typical dimensions and masses▸The disc with a small hole: 106 g, 89.0 mm diameter, 3.6 mm hole▸The disc with co...

The Rotary Motion Accessory Kit works with the Rotary Motion Sensor (RMV-BTD) and the Go Direct® Rotary Motion Sensor (GDX-RMS). Everything in the Rotational Motion Accessory Kit (AK-RMV) will work with the older sensors with one important ex...

There are two resolutions for our Rotary Motion Sensors. Low resolution and High resolution which leads to 4 times as many pulses for a given rotation. The max rotational speed is higher with the low resolution setting. For Vernier-manufactured...

Rotary Motion Sensor RMV-BTD—Sensor onlyRMPK-BTD—Sensor + Accessory Kit Specifications and User Guide Rotary Motion Sensor Rotational Motion Accessory Kit Troubleshooting Primary Test: Attach the Rotary Motion Sens...

The dimensions and masses are the same for the Standard Rotary Motion Sensor and the Go Direct Rotary Motion Sensor. The measurements are as follows: Diameter of small groove: 10 mm Diameter of medium groove: 29 mm Diameter of large groove: 4...

This information pertains to the original LabQuest.If you have LabQuest 2, see this article. This document has information for device drivers that work with older versions of Logger Pro. If you are using a Logger Pro version 3.11 or newer with La...

Surface Temperature Sensor (STS-BTA) Specifications and User Guide Troubleshooting Primary Test: Plug in the sensor and start up the data-collection program. Temperature readings should appear on the main screen of the pr...

Go Direct® Surface Temperature Sensor (GDX-ST) Specifications and User Guide Troubleshooting General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions...

Go Direct® Colorimeter (GDX-COL) Specifications and User Guide Troubleshooting General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for your devi...