By default, Go Wireless sensors are shipped with the same default name. When using multiple sensors in the same classroom, it can be advantageous to give each probe a unique name.
Go Wireless app for iOS
1. Launch Go Wireless app.
2. Press the power...
Below are some frequently asked questions regarding the battery for Go Wireless sensors.
Q: Is there a way to tell the status of the battery?
A: See the below information for your specific application.
Go Wireless app or Graphical Analysis (v2.0 or...
Custom calibrations and unit choices can be saved to many sensors. As a result you may want to return the sensor to factory default settings.
You can do this in several applications:
Using Logger Pro:
1. Choose Calibrate --> (sensor name) from t...
O2 Gas Sensor (O2-BTA)
Specifications and User Guide
Which Oxygen Gas Sensor do I have?
2007 - 2021 Version
Current Version
Troubleshooting
Primary Test: Blow on the sensor. Do you see a decrease in the Oxygen Gas re...
Many of our electric circuits experiments, such as the Ohm's Law experiment in Physics with Vernier (PWV) require students to construct circuits from batteries, resistors, light bulbs, and other electronic components. We recommend using our Vernier C...
There are some sensors that include the autoID feature, but that feature does not work on LabPro. This is not a sensor shortcoming, but is due to the LabPro firmware not having information about the sensor.
Sensors that do not autoID with LabPro ...
When connecting LabQuest interface to a Windows 7 computer after installing Logger Pro, the final process for making the WinUSB device driver available to the operating system and Logger Pro is complete. Some names for this process include "getting t...
When an Ion Selective Electrode (ISE) is connected to a Go Wireless Link, the attached sensor can be identified incorrectly. This happens when you have a "dry" electrode, one that has not been properly soaked, or when the sensor is "in air" instead o...
This sensor is no longer available. Information is presented for reference only.
Dissolved Oxygen Probe (DO-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: If the probe is filled with the correct filli...
This information pertains to the original LabQuest and LabQuest 2.
If you have LabQuest 3, see this article.
As of April 2012, LabQuest Charge Station (LQ-CRG, discontinued) are shipping with inserts for both LabQuest and LabQuest 2, so you will...