This article refers to the Go Direct® 3-Axis Magnetic Field Sensor (GDX-3MG)
The GDX-3MG sensor uses two three-axis magnetic-field sensor ICs which are placed at the end of the plastic rod. The precise location of each chip is:
+/- 5 mT - A...
If your device can’t find your Go Direct spectrometer when trying to connect via Bluetooth, work through the checklist below.
✅ 1. Update to the latest Software VersionGo Direct SpectroVis Plus (GDX-SVISPL) requires Spectral Analysis v5.0 or ...
If your Go Direct SpectroVis Plus (GDX-SVISPL) is disconnecting unexpectedly while using Bluetooth, try the following steps to improve stability:
✅ 1. Ensure the Battery Is Fully ChargedA low battery is the most common cause of dropped Bluetoot...
If you only connect your Go Direct® SpectroVis® Plus Spectrophotometer (GDX-SVISPL) by USB, then no update is needed. If you wish to use it wirelessly by Bluetooth, it may or may not need updating depending on the following criteria. To conf...
Use Thermal Analysis to analyze the temperatures of up to four points or regions in a thermal video taken using the FLIR ONE® Thermal Camera for iOS. The video is taken at about 8 frames per second. Temperature resolution is set to 0.1°C.
The foll...
We sell Starna Quartz cuvettes. They are all heat-fused, using no adhesive:
1. Quartz Cuvettes (CUV-QUARTZ)
Each cuvette is a standard rectangular cuvette. They are Far UV Quartz with a spectral range from 170 - 2700 nm. The path length is 10 mm....
It depends on the spectrometer.
The following spectrometers can usually be repaired. Fees will apply for out-of-warranty parts.
SpectroVis Plus (discontinued - sold between 2010 - 2016)
Go Direct SpectroVis Plus (started selling in 2017)
...
There is a user preference in LabQuest 2 and LabQuest 3 to deter student access to naming, network, and connections settings. This is not a true lockout. It simply removes the icons used to access these features. It is simple to set up as there ar...
Yes, the Centripetal Force Apparatus Moment of Inertia Accessory Kit (CFA-MIK) will fit on both the Centripetal Force Apparatus (CFA) and the Go Direct® Centripetal Force System (GDX-CFA).
When using this accessory with the Go Direct® Centrip...
You can collect angular velocity data using the Go Direct® Force and Acceleration Sensor (GDX-FOR) attached to the beam of the Centripetal Force Apparatus (CFA). However, you must use a photogate Photogate (VPG-BTD) to collect angular velocity da...