Use Thermal Analysis to analyze the temperatures of up to four points or regions in a thermal video taken using the FLIR ONE® Thermal Camera for iOS. The video is taken at about 8 frames per second. Temperature resolution is set to 0.1°C.
The foll...
Vernier sells two versions of the Starna Quartz cuvettes. They both are heat-fused, using no adhesive.
Quartz Cuvettes (CUV-QUARTZ)
These are standard rectangular cuvettes.
They are Far UV Quartz with a spectral range from 170 - 2700 nm. ...
It depends on the spectrometer.
The following spectrometers can usually be repaired. Fees will apply for out-of-warranty parts.
SpectroVis Plus (discontinued - sold between 2010 - 2016)
Go Direct SpectroVis Plus (started selling in 2017)
...
There is a user preference in LabQuest 2 and LabQuest 3 to deter student access to naming, network, and connections settings. This is not a true lockout. It simply removes the icons used to access these features. It is simple to set up as there ar...
Yes, the Centripetal Force Apparatus Moment of Inertia Accessory Kit (CFA-MIK) will fit on both the Centripetal Force Apparatus (CFA) and the Go Direct® Centripetal Force System (GDX-CFA).
When using this accessory with the Go Direct® Centrip...
You can collect angular velocity data using the Go Direct® Force and Acceleration Sensor (GDX-FOR) attached to the beam of the Centripetal Force Apparatus (CFA). However, you must use a photogate Photogate (VPG-BTD) to collect angular velocity da...
The original Energy Audit activity (Activity #3 in Renewable Energy with Vernier), which uses the Watts Up Pro (No Longer Sold) (WU-PRO, discontinued), is available in the electronic resources for Renewable Energy with Vernier. If your school or depa...
Go Direct® SpectroVis® Plus Spectrophotometer (GDX-SVISPL)
Specifications and User Guide
https://youtu.be/YnLLWfPzhe4
Please read the user manual for general usage information.
Troubleshooting
Primary Test...
Yes, you can. Of the various force sensors we make, the ones most suitable for a wind tunnel investigation would be our Dual-Range Force Sensor (DFS-BTA) and Go Direct® Force and Acceleration Sensor (GDX-FOR). If you want to measure more than one...
Yes. The sensors that were included with the original CBL auto-ID and work fine with the Graphical Analysis App. A supported interface is required.
Go!Link (GO-LINK)
LabQuest Mini (LQ-MINI)
LabQuest Stream (LQ-STREAM)
...