Shop

Search


34 results for "EasyLink"

  • What sensors work with EasyLink and EasyData? - Technical ...

    Photogate – EasyLink does not support digital sensors Polarimeter (Chemical) – Not supported by EasyData Power Amplifier – Can only measure internal current Projectile Launcher – EasyLink does not support digital sensors Radiation Monitors – Not supported by EasyData Rotary ...

    https://www.vernier.com/til/1451

  • My Colorimeter won't calibrate properly when used with a ...

    When using Go!Link (GO-LINK) or EasyLink (EZ-LINK) with a Colorimeter (COL-BTA) on the 565 nm setting, you may occasionally see a bad value, typically 108% T, after calibration. This value should be closer to 100% T. This problem is rare, so if you have multiple sensors and interfaces, try different combinations and you will likely find combinations that work properly.

    https://www.vernier.com/til/4265

  • What sensors are not compatible with Go!Link? - Technical ...

    Go!Link was designed to be a low-cost interface and does not support several physics-related sensors. It is designed primarily for use in grades K-8, but can also work as a basic computer-only interface in several other science areas. This same list also applies to EasyLink (EZ-LINK). The sensors that do not work with Go!Link include:

    https://www.vernier.com/til/1908

  • Can I connect an EasyTemp, EasyLink or CBR 2 directly to a ...

    EasyTemp (or Go!Temp) – No EasyLink (or Go!Link) – No CBR 2 (or Go!Motion) – Requires Special Cable not included with sensor The Lab Cradle...

    https://www.vernier.com/til/2406?keyword=cbr2

  • What sensors and accessories would I need to do the ...

    EasyLink (EZ-LINK) Dual-Range Force Sensor (DFS-BTA) Colorimeter (COL-BTA) pH Sensor (PH-BTA) Conductivity Probe (CON-BTA) EasyTemp (EZ-TMP) The above products and accessories support 13 of the 14 activities in the book. The one unsupported activity (“Case 3-Name That Tune”) makes use of a microphone, which requires sampling rates that are ...

    https://www.vernier.com/til/1559

  • Data-Collection Apps for Texas Instruments Calculators ...

    EasyLink. CBL 2. LabPro. DataMate for Legacy Calculators (TI-73, TI-89, TI-92) Vernier DataMate is a general-purpose program that supports the use of most of our sensors. It comes already loaded on LabPro and CBL 2 interfaces and is transferred to your calculator from those interfaces.

    https://www.vernier.com/til/5177

  • What sensor data-collection app is used with TI-Nspire ...

    DataQuest App. DataQuest supports data collection, graph and tabular representation, and data analysis—all in a single TI-Nspire application. When used with the Vernier EasyLink (EZ-LINK) sensor interface, DataQuest supports 60 Vernier sensors. Additional sensors are supported when used with the TI-Nspire Lab Cradle (TI-NSLABC).

    https://www.vernier.com/til/5061

  • Can I use a Go! device with my calculator or an Easy ...

    EasyTemp, EasyLink and CBR 2 devices are designed for use with the TI-84 Plus and TI-Nspire graphing calculators. As such they come equipped with USB Mini-A plugs to permit connection to the USB port on a the calculator.

    https://www.vernier.com/til/1469

  • Soil Moisture Sensor Troubleshooting and FAQs - Technical ...

    -Resolution: 0.05% (SensorDAQ), 0.1% (LabPro, LabQuest – all versions, Go! Link, or EasyLink); 0.4% (CBL 2)-Calibration: Slope = 108%/volt; Y-intercept = -42%-Power: 3 mA @ 5 VDC-Operating temperature: -40 °C to +60 ºC-Dimensions: 8.9 cm x 1.8 cm x 0.7 cm (active sensor length 5 cm) CALIBRATION-Calibrate?

    https://www.vernier.com/til/1617

  • Colorimeter Troubleshooting and FAQs - Technical ...

    Link or EasyLink. What types of liquids can be poured into your plastic Colorimeter or Spectrometer cuvettes without harming the cuvette? EXPERIMENTS. Do you have any experiments written for the LabQuest and the older model Colorimeter?

    https://www.vernier.com/til/1367

  • Can I use Go! and Easy products at the same time as the TI ...

    In general, we do not recommend the use of USB-direct sensors (EasyTemp/Go!Temp, CBR2/Go!Motion) or interfaces (EasyLink/Go!Link) while using the Lab Cradle. This combination of data collection devices will experience timing accuracy issues between devices.

    https://www.vernier.com/til/2405

  • Can an EasyTemp or EasyLink be used with LabQuest ...

    For a LabQuest 2, the or can be connected directly to the Mini USB socket, (on the right side of the screen.) For an original...

    https://www.vernier.com/til/2039

  • What sensor data-collection app is used with TI-83/84 Plus ...

    EasyLink (EZ-LINK) CBR 2 (CBR2) EasyTemp (EZ-TMP) LabPro ® Original CBR ; When EasyData is used with CBL 2, LabPro or EasyLink, it supports a wide range of our sensors, including pH, Oxygen Gas, and Dual-Range Force.

    https://www.vernier.com/til/5078

  • What data collection hardware works with TI-Nspire ...

    EasyLink or Go!Link. Sensors Accelerometers Low-g Accelerometer 25-g Accelerometer 3-Axis Accelerometer* Anemometer Barometer Blood Pressure Sensor Charge Sensor CO2 Gas Sensor Colorimeter Conductivity Probe Current Sensors Current Probe High Current Probe Dissolved Oxygen Drop Counter* Dual-Range Force Sensor ...

    https://www.vernier.com/til/1718

  • Can I use two TI-Nspire Lab Cradles or two EasyLinks ...

    The TI-Nspire software does support multiple EasyLink/Go!Link interfaces connected to the same computer. Because of power issues, it is recommended that these interfaces be connected directly to the computer.

    https://www.vernier.com/til/2407

  • Should I buy EasyLink or Go!Link to work with both Texas ...

    Because of the lower overall cost, we recommend you purchase the following: The Go!Link has a 1 m cable with a standard USB...

    https://www.vernier.com/til/4363/

  • Which Vernier and Texas Instruments products are ...

    EasyLink (EZ-LINK) Go!Link (GO-LINK)-(requires adapter) Original CBL; Original CBR; TI-Nspire ViewScreen Panel; Graphical Analysis 3– Import calculator data feature (v3.4 or older) Logger Pro ® 3 (LP) – Import calculator data feature; TI-83, TI-83 Plus/TI-84 Plus family calculators – for file and data sharing

    https://www.vernier.com/til/1721

  • TI SmartView Troubleshooting and FAQs - Technical ...

    TI-84 SmartView™ CE Emulator Software (TI-SV) TI-84 SmartView™ CE Emulator Software (TI-84EMU-VP-ESW) TI-84 SmartView™ CE Emulator Software (TI-84EMU-NP-ESW). FREQUENTLY ASKED QUESTIONS

    https://www.vernier.com/til/3086

  • Why does the Import from TI Device in Logger Pro not show ...

    – Lists collected using a LabPro, CBR or CBL2 will be out of order. Lists collected using an EasyLink, EasyTemp or CBR2 will be properly ordered. – If the lists are simply out of order, select your desired lists as normal. – If you cannot tell the lists apart, select all of the lists for import, and then delete any list you do not want.

    https://www.vernier.com/til/2072

  • Texas Instruments (TI) Troubleshooting and FAQs ...

    Texas Instruments, a Vernier partner since 1993, provides affordable graphing handhelds, software, and data-collection accessories for math and science classrooms. TI-Nspire Other calculators TI-Nspire CX...

    https://www.vernier.com/til/2562

  • How do I use a computer or Chromebook with only USB-C ...

    * EasyLink and EasyTemp require a additional Easy-to-Go! USB adapter to work with computers or Chromebooks. **Purchase third-party cables with care. The USB-C standard is new enough that there are some poor quality cables being sold:

    https://www.vernier.com/til/3822

  • Where can I find BTA and BTD connectors and sockets ...

    1. Options for obtaining a male analog (BTA) connector for use with LabPro, LabQuest (all versions), Go!Link, EasyLink, or CBL 2 or analog output on LabPro include Analog BTA Cable (CB-BTA) — This cable has a right-hand release BTA connector on one end and bare wire on the other.

    https://www.vernier.com/til/818

  • Will my USB device work with this cable?

    This adapter is to allow the EasyTemp or EasyLink to connect to a computer. It has a USB Mini-A receptacle and a USB Standard-A plug. Most consumer devices will not work with our adapters because they generally use USB Mini-B. A USB Mini-B plug does not work with a USB Mini-A receptacle and a USB Mini-A plug does not work with a USB Mini-B ...

    https://www.vernier.com/til/1653

  • Dissolved Oxygen Sensor Troubleshooting and FAQs ...

    Dissolved Oxygen Probe (DO-BTA) Specifications and User Guide. TROUBLESHOOTING-Primary Test: If the probe is filled with the correct filling solution, the blue protective cap is removed, and it is being gently stirred in the water, the readings should be reasonable (6 mg/L to 10 mg/L is typical).

    https://www.vernier.com/til/1413

  • TI-Nspire Troubleshooting and FAQs - Technical Information ...

    Can I connect an EasyTemp, EasyLink or CBR 2 directly to a TI-Nspire Lab Cradle? Can I use two TI-Nspire Lab Cradles or two EasyLinks connected to the same TI-Nspire or computer? Is there a DataQuest User Manual? Can I use Vernier Photogates (VPG-BTD) with TI calculators? Why is the DataQuest Collect button grayed out on my TI-Nspire when I use ...

    https://www.vernier.com/til/1726

  • Can I use the CBL Photogate Adapters (CBL-P or CBL-2P ...

    No. The CBL Photogate Adapter and the CBL Dual Photogate Adapter connect to an analog channel on an original CBL. These adapters only work with...

    https://www.vernier.com/til/2085

  • Do you have any science experiments written for TI-Nspire ...

    Science with TI-Nspire™ Technology is a free download that contains 33 data-collection experiments in Earth/environmental science, biology, chemistry, and physics for use with TI-Nspire handhelds...

    https://www.vernier.com/til/5478

  • What sensor data-collection app do I use with older TI ...

    DataMate is the data-collection software for older TI graphing calculators that use CBL 2™ or LabPro® interfaces.

    https://www.vernier.com/til/5112

  • What sensors work with EasyLink and EasyData?

    Perhaps the best way to answer this is to say which sensors do not work with EasyLink and EasyData. The following sensors are not supported...

    http://www.vernier.com/til/1451/

  • Can I use a Go! device with my calculator or an Easy device with a computer or Chromebook?

    Go!Temp, Go!Link and Go!Motion devices are designed for use with computers. As such they come with USB cables with standard-A connectors for connection to the...

    http://www.vernier.com/til/1469/

  • Can I use two TI-Nspire Lab Cradles or two EasyLinks connected to the same TI-Nspire or computer?

    Handhelds Using multiple Lab Cradles or EasyLinks on a TI-Nspire handheld is generally not possible and not recommended. Computers The TI-Nspire software does not support...

    http://www.vernier.com/til/2407/

  • Can I connect an EasyTemp, EasyLink or CBR 2 directly to a TI-Nspire Lab Cradle?

    EasyTemp (or Go!Temp) – No EasyLink (or Go!Link) – No CBR 2 (or Go!Motion) – Requires Special Cable not included with sensor The Lab Cradle...

    http://www.vernier.com/til/2406/

  • Can I use Go! and Easy products at the same time as the TI-Nspire Lab Cradle?

    In general, we do not recommend the use of USB-direct sensors (EasyTemp/Go!Temp, CBR2/Go!Motion) or interfaces (EasyLink/Go!Link) while using the Lab Cradle. This combination of data...

    http://www.vernier.com/til/2405/

  • Why won't my USB data collection devices work with TI-Nspire in 84 Mode?

    Version 1.1 (TI-84 Mode OS 2.42) of the TI-Nspire software does not support data collection via the USB port when in TI-84 Mode. Be sure...

    http://www.vernier.com/til/1723/

SHARE YOUR CART