Search
Melt Station Capillary Tubes- How do I remove a broken capillary tube from a Melt Station?
- May 23, 2017 ... Caution: Do not handle a broken capillary tube with your fingers. Wear safety glasses or safety goggles. 1. Turn off the Melt Station and allow ...
- https://www.vernier.com/til/3899
- Go Direct Melt Station Troubleshooting and FAQs
- Aug 22, 2017 ... Safety shut down: The heating block is automatically powered down after approximately 60 minutes of heating. Capillary tubes: 1.4–1.8 mm outside ...
- https://www.vernier.com/til/3852
- Melt Station Troubleshooting and FAQs
- Aug 22, 2017 ... Safety shut down: The heating block is automatically powered down after approximately 60 minutes of heating. Capillary tubes: 1.4–1.8 mm outside ...
- https://www.vernier.com/til/2321
- The control knob on my Melt Station is loose. How can I tighten it?
- The control knob on the Melt Station is held in place with two set screws. The drive size of the set screws is 1.5 mm....
- https://www.vernier.com/til/3277/
- Can you use glass test tubes in the Go Direct SpectroVis Plus Spectrophotometer
- While it is not recommended, glass test tubes can be used in the . Extra caution should be used if you are using any organic...
- https://www.vernier.com/til/4489/
- Davis Instruments Troubleshooting and FAQs
- As of January 2025 Vernier Science Education no longer sells Davis Instruments products. For help with Davis Instrument products see below: Davis Support Web Page:...
- https://www.vernier.com/til/2515/
- Spectrum Tubes Troubleshooting and FAQs
- TROUBLESHOOTING – Primary Test: Insert the spectrum tube in the Power Supply (Single or Carousel) and turn on the Power Supply. The spectrum tube should...
- https://www.vernier.com/til/3585/
- Can I autoclave the bottle that comes with my CO2 or O2 sensor?
- We do not recommend autoclaving the 250 mL Nalgene bottles , , that ship with the O2 and CO2 gas sensors. We also do not...
- https://www.vernier.com/til/4339/
- Can I use a dishwasher to wash the Nalgene bottle that shipped with my O2 or CO2 Gas Sensor?
- It is recommended that you wash the Nalgene bottles by hand. This includes and the . The bottles are made of Polyethylene terephthalate G copolymer...
- https://www.vernier.com/til/2318/
- What do the LED lights on the LabQuest Charging Station signify?
- The LabQuest Charging Station contains an LED light by each of the 4 charging ports. An LED light glows if current flowing to the port...
- https://www.vernier.com/til/2728/
SAVE/SHARE YOUR CART