Supported Calculator Apps
- EasyData—for TI-84 Plus calculators and TI-SmartView emulator software
- DataQuest—for TI-Nspire handhelds and computer software
Troubleshooting
- Primary Test: Plug in the sensor and run the data-collection program. Hold the tip of the sensor in your hand and check for the temperature readings to change.
- Secondary Test: Verify the LED on EasyTemp is green. If your LED is not green, see:Â The LED on my Go! device or LabQuest Mini is not green. What does that mean?
Additional Troubleshooting
- Texas Instruments (TI) Troubleshooting and FAQs
- Which Vernier and Texas Instruments products are compatible with TI-Nspire products?
- Can an EasyTemp or EasyLink be used with LabQuest?
- TI SmartView Troubleshooting and FAQs
- Can I use Go! devices with TI-84 Plus or TI-Nspire calculators or Easy devices with computers or Chromebooks?
- Should I buy EasyTemp, Go!Temp, or Go Direct Temp to work with Texas Instruments calculators, computers, and Chromebooks?
- Can I connect an EasyTemp, EasyLink or CBR 2 directly to a TI-Nspire Lab Cradle?
- Can I use Go! and Easy products at the same time as the TI-Nspire Lab Cradle?
- Can I use two TI-Nspire Lab Cradles or two EasyLinks or Go!Links connected to the same TI-Nspire or computer?
- What data collection hardware works with TI-Nspire products?
- EasyData quits in the middle of data collection with my EasyTemp or EasyLink.
- My EasyTemp is not working with my TI-84 Plus CE Python Edition calculator, what can I do?
Specifications
- Range: –20°C to 115°C
- Maximum temperature that the sensor can tolerate without damage: 150°C
- Resolution: 0.07°C
- Accuracy: ± 0.5°C
- Response time: 4 s (to 90% of full reading in water)
Calibration
Calibrate? EasyTemp is very nicely calibrated when shipped. Most never need to calibrate. EasyTemp uses a linear calibration equation and can be calibrated if required using a two point calibration. See the data collection app user manual for details on how to calibrate a sensor.
Related Products
- Easy to Go! Adapter (MINI-USB), for connecting EasyTemp to computers or Chromebooks
- Go!Temp (GO-TEMP), for use with calculator emulator software
- EasyLink (EZ-LINK), calculator interface required for temperature sensors listed below
⚬ Stainless Steel Temperature Probe (TMP-BTA)
⚬ Extra-Long Temperature Probe (TPL-BTA)
⚬ Wide-Range Temperature Probe (WRT-BTA)
⚬ Thermocouple (TCA-BTA)
⚬ Surface Temperature Sensor (STS-BTA) - Go Direct® Temperature Probe (GDX-TMP), for TI-Nspire CX II and TI-Nspire CX II CAS calculators only