This issue occurs when using a Motion Encoder Cart Receiver (MEC-BTD), with a LabPro Interface. The zero point is not maintained between experimental runs.
This is caused by an interaction between the encoder system and LabPro.
This behavior cannot...
There are some sensors that include the autoID feature, but that feature does not work on LabPro. This is not a sensor shortcoming, but is due to the LabPro firmware not having information about the sensor.
Sensors that do not autoID with LabPro ...
No. These adapters only work with the original CBL . The CBL Photogate Adapter (shown here) and CBL Dual Photogate Adapter (both of which are discontinued) connect to an analog (BTA) channel on an original CBL.
For all other TI and...
If you already own several LabPros that you use with computers and are looking to add additional stations, the LabQuest Mini is our recommended option. Although it looks different than LabPro, it functions the same when connected to a computer and c...
This problem shows up both as noise and as a change in calibration of the Dual-Range Force Sensor when the Motion Detector is used at the same time with a LabPro interface. The problem does not happen with all Dual-Range Force Sensors, and it does no...
Although the Physics program was originally written for the original CBL, it has been adapted to work with the CBL 2 and LabPro interfaces. The use of photogates is different depending on the type of interface that is being used. The program will ad...
We do not sell anything like this, but we can give you some options.
If you will not be shipping the equipment and will just be sharing it within the same school, many teachers use Rubbermaid containers or those clear, plastic, stackable shelve...
This note refers only to LabPro (LABPRO) and not our LabQuest platforms. LabQuest 2 (LABQ2) has a standard Kensington security slot.
The following is a description of how to secure a LabPro, as written by Priscilla Laws at Dickinson college.
1. D...
If you are using the Polarimeter with a LabPro interface, please do the following:
1) Make sure you are using Logger Pro 3.8.5 or newer. To update your software, go to https://www.vernier.com/support/updates/logger-pro/
2) Only rotate the analyzer ...
When a photogate is used with a LabPro in time-based data collection, photogate data is sent by the LabPro to the computer at the end of data collection. If you choose to stop data collection early by clicking the Stop button, the data will not be se...