Vernier Mini GC (GC-MINI, discontinued)
Specifications and User Guide
If you have the Go Direct Mini GC, see Go Direct Mini GC Troubleshooting and FAQs
If you have the Mini GC Plus, see Mini GC Plus Gas Chromatograph Troubles...
LabQuest Stream (LQ-STREAM)Specifications and User Guide
TROUBLESHOOTINGOn a Mac or Windows ComputerGraphical Analysis/Graphical Analysis Pro and Logger Lite - LabQuest Stream must be connected via USB. It will not work via Bluetooth.Logger...
Magnetic Field Sensor (MG-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Confirm that the setting switch on the sensor wand is appropriate for the experiment. The low amplification (6.4 mT range) is used...
Chloride Ion-Selective Electrode (CL-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Check the raw voltages while calibrating in the standards. The high (1000 mg/L) should be around 2.0 volts. The low (10...
Yes. Our analog sensors can connect to the Hummingbird with the aid of a connector that is available from the Birdbrain Technologies website: http://www.BirdbrainTechnologies.com
or using our Analog Protoboard Adapter (BTA-ELV) connector, a breadb...
Barometer (BAR-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: The Barometer measures pressure in a very small range around sea level atmospheric pressure. Make sure that the Barometer is not in a situation ...
This sensor is no longer available. Information is presented for reference only.
Infrared Thermometer (IRT-BTA, discontinued)
Specifications and User Guide
Troubleshooting
Primary Test: Press the MEAS button on the dev...
Extra-Long Temperature Probe (TPL-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Connect the Extra-Long Temperature Probe and run the data-collection program. Hold the tip of the sensor in your hand and c...
Conductivity Probe (CON-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Place the toggle switch at the desired setting, run the data-collection program, and take a reading in a solution of known TDS. We sugge...
Go!Temp (GO-TEMP)
Specifications and User Manual
Troubleshooting
Primary Test: Plug in the sensor and run the data-collection program. Hold the tip of the sensor in your hand and check for the temperature readings to ...