...in the same circuit at the same time, and they will not interfere with each other. Related TILs: What is the difference between a Differential Voltage Probe (DVP-BTA) or Go......
...pull tab. 5. The battery is connected to LabQuest with a small, white plug that is inserted into a socket secured to the circuit board. 6. Disconnect the plug by......
...a different LabQuest, or if the unit fails to recognize a USB thumb drive, the circuit board in the LabQuest that controls both USB ports may be broken. In this......
...on the circuit. The specifications of the drill we used stated a maximum rotational speed of about 600 rpm, therefore the drill would not be able to light an LED......
...well with the Vernier Energy Sensor. For example, investigating an RL Circuit according to instructions in Advanced Physics With Vernier – Beyond Mechanics experiment 14 will not work with the......
...potentiometer that allows the user to vary resistance between 6 Ω and 225 Ω. The Vernier Resistor Board (VES-RB) is a small circuit board with seven resistors (10 Ω, 15......
...Accessory Kit (CFA-MIK) Vernier Circuit Board 2 (VCB2) The following sensors and accessories would ideally be purchased per lab station, but also work quite well for large group demonstrations. Depending......
...this could be a good starting point for making your own HMP-BTD. We used to build the HMP-BTD by starting with the circuit board for the CBL-2P or the Dual-Photogate......
Yes. The Time of Flight Pad (TOF-VPL) acts similarly to a photogate. When an object strikes the pad it makes an electrical connection and closes the circuit. Logger Pro identifies......
...be related to the power adapter or charge circuit. If the LabQuest still will not turn on, it will need to come in for repair. Please contact Vernier Technical Support......