If you calibrate a PH-BNC electrode with an Electrode Amplifier (EA-BTA), typical potential readings are -pH 4 buffer solution: 1.56 volts -pH 7 buffer solution: 1.17 volts -pH 10 buffer solution: 0.80 volts If you calibrate a PH-BNC electrode ...

Below is a table that compares the different features of our LabQuest interfaces: LabQuest 2 (LABQ2) LabQuest 3 (LABQ3) LabQuest Stream (LQ-STREAM) (discontinued) LabQuest Mini (LQ-MINI) Recommended when: Computers, Chromebooks, and tablets...

The calibration equations for the CO2 Gas Sensors are listed below. They are divided into the old model (square body, pre-2007) and newer model (rounded body, post-2007). Sensor 'CO2 Gas' (-DIN and -BTA, pre-2007) Calibration 'CO2 ppm': ...

EasyLink (EZ-LINK)User Manual Troubleshooting The LED on the EasyLink is a useful troubleshooting tool. When working correctly, the LED on the EasyLink is green. If your LED is not green, check your calculator batteries. Pro...

Yes. Our analog sensors can connect to the Hummingbird with the aid of a connector that is available from the Birdbrain Technologies website: http://www.BirdbrainTechnologies.com or using our Analog Protoboard Adapter (BTA-ELV) connector, a breadb...

Birdbrain Technologies sells an adapter to connect our analog sensors to one or more of the four sensor connections on the Hummingbird. You can also use our Analog Protoboard Adapter (BTA-ELV) and a breadboard, using https://www.vernier.com/sup...

Essentially all of our analog sensors (those ending with -BTA) can be used with the Hummingbird. These will provide a voltage output that can be translated into a sensor reading. We do not recommend using ion-selective electrode sensors, dissolved o...

If you are using our analog sensors connected to the Hummingbird with the Vernier BTA Sensor Adapter you can use any programming language supported by Hummingbird to program your robot. It appears that the most commonly used languages are Scratch and...

FLIR ONE Gen 3 (FLIRONE3-IOS)FLIR ONE Pro LT for iOS (FLIRLT-IOS)FLIR ONE Pro Gen 3 (FLIRPRO-IOS)FLIR ONE® Thermal Camera for iOS (FLIRONE-IOS, discontinued) Vernier sells three versions of the FLIR ONE thermal camera. For a direct comparison of...

Go Direct® Gas Pressure Sensor (GDX-GP) Specifications and User Guide Troubleshooting General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for yo...