...10 volts and this concept is often useful for these projects. Our voltage sensors cover the following ranges: * Differential Voltage Probe (DVP-BTA): ±6 V * Voltage Probe (VP-BTA): ±10......
...away from computers, power supplies, cell phones or other devices that can cause electrical interference. 6) If you are using the Exercise Heart Rate Monitor (EHR-BTA) it may take some......
The Tris-Compatible Flat pH Sensor (FPH-BTA) is more durable than the regular pH sensor, but it still needs to be handled with some care. Both sensors have glass parts that......
This information relates to connecting a Hand Dynamometer (HD-BTA) to an NI-ELVIS interface. In some situations, the signal may be noisy. To fix this, simply place a resistor in series......
When testing a pH Sensor (pH Sensor (PH-BTA), Tris-Compatible Flat pH Sensor (FPH-BTA), Go Direct® pH Sensor (GDX-PH)), it is best to place it into a known buffer solution. This......
Dissolved Oxygen Probe (DO-BTA) Specifications and User Guide TROUBLESHOOTING -Primary Test: If the probe is filled with the correct filling solution, the blue protective cap is removed, and it is......
...Cart (MASS). Also attached is a photo showing how to attach the Vernier mass included in conjunction with the Dual-Range Force Sensor (DFS-BTA) and the Low-g Accelerometer (LGA-BTA). See also......
...0.6 amperes of current so these concepts is often useful for these projects. For larger currents, see: High Current Sensor (HCS-BTA) and Go Direct® Current Probe (GDX-CUR) Note: Our Current......
If the reading of a Stainless Steel Temperature Probe (TMP-BTA) or Surface Temperature Sensor (STS-BTA) never changes or gives erroneous readings, it is probably damaged and can not be repaired.......
The Vernier Breadboard Cables (Breadboard Cable (Analog) (BB-BTA) and Breadboard Cable (Digital) (BB-BTD)) provide an easy way to connect your sensor to a Vernier interface. Once your sensor is connected......