UVA Sensor (UVA-BTA) Specifications and User Guide Troubleshooting Primary Test: Are you using the UVA Sensor to check UVB light? Confirm that the sensor is appropriate for the experiment. Secondary Test: Take readings...

UVB Sensor (UVB-BTA) Specifications and User Guide Troubleshooting Primary Test: Are you using the UVB Sensor to check UVA light? Confirm that the sensor is appropriate for the experiment. Secondary Test: Take readings...

We have three products you might consider: 1. (Best Choice) Constant Current System (CCS-BTA)The Constant Current System is a DC power source with a built-in current probe designed for use in electrochemistry experiments. The user can set the current...

Wide-Range Temperature Probe (WRT-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the sensor and run the data-collection program. Hold the tip of the sensor in your hand and check for the temperat...

This information pertains to the original LabQuest. If you have LabQuest 2 or LabQuest 3, see this article. Units of the Vernier Microphone (MCA-BTA), produced between April of 2007 and August 22, 2011, may exhibit a conflict with original LabQues...

Sound Level Sensor (SLS-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the Sound Level Sensor to an interface. The data-collection software will identify the sensor and begin a live readout of t...

There are several ways that you can correct for baseline drift in volume when using our spirometers. The best method depends on what software and sensor you are using. If you have a Go Direct® Spirometer (GDX-SPR) the easiest way to correct for b...

Yes, you can connect Vernier sensors to a LEGO NXT or EV3 (the EV3 is LEGO's newer model robot platform, the NXT is the older platform). The NXT Sensor Adapter (BTA-NXT) allows Vernier analog (BTA) sensors to be used with the NXT or EV3. To us...

There are a few ways in which to use Vernier sensors with LEGO hardware and software. But those connection options are fairly limited, as outlined below. The NXT Sensor Adapter (BTA-NXT) provides the ability to connect certain Vernier LabQuest a...

Conductivity Probe (CON-BTA) Specifications and User Guide Troubleshooting Primary Test: Place the toggle switch at the desired setting, run the data-collection program, and take a reading in a solution of known TDS. We s...