Yes, Vernier does sell a Goniometer.
Goniometer (GNM-BTA)
However, if you already have our Low-g Accelerometer, you can use it to report tilt angle using our Logger Pro 3 software.
The JointAngleSensorLowG.cmbl Logger Pro experiment file is c...
Tech Support Search
If a Current Probe (DCP-BTA) was subjected to more than 0.6A, it will burn out a resistor inside the sensor. This can happen when students don't get the value they want, so they just keep increasing the current on a power supply.
Typically a blown...
This article refers to the following products: Dual-Range Force Sensor (DFS-BTA) Wireless Dynamics Sensor System (WDSS)
Both of these sensors have a hexagonal barrel, or standoff, extending from the sensor case. This part is firmly attached to th...
The Charge Sensor (CRG-BTA) contains several capacitors which ideally should maintain a constant state when the test leads of the sensor are in electrostatic equilibrium. However, environmental conditions such as local humidity, nearby static charges...
Anemometer (ANM-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Connect the sensor to the interface and launch the data collection software.
Secondary Test: Blow onto the sensor to make sure the readin...
Yes, we have updated written instructions on how to conduct the AP Chemistry Electroplating experiment using the Constant Current System (CCS-BTA).
If the school or department has a site license for the Advanced Chemistry with Vernier lab book, t...
The High Current Sensor uses a Hall-Effect sensor to measure the current. The Hall Effect is a magnetic phenomenon, so a strong magnetic field in the area the HCS-BTA sensor could cause a erroneous reading. Examples might include a electric motor or ...
No.
The Go Direct® Ethanol Vapor (GDX-ETOH) and Ethanol Sensor (ETH-BTA) are gas sensors that detect ethanol vapor. The sensors needs to be placed above a liquid sample. The use of Tape for Ethanol Sensor (ETH-TAPE) (one roll is included with...
If you want to use a Vernier COâ‚‚ Gas Sensor and a Vernier ethanol sensor to show that COâ‚‚ gas and Ethanol are both produced during fermentation, you should use the following protocol. Please note that you will need a BioChamber 2000 (BC-2000), a...
It may not be necessary to perform a calibration when using and of the Vernier ethanol sensors in the classroom.
If your experiment or application is evaluating the rate of ethanol production, such as determining fermentation rates with yeast, or...