Force Plate (FP-BTA) Specifications and User Guide Which force plate do I have?The original Force Plate (shown here) was revised in November 2023.Original Force Plate Specifications and User Guide Original Force Plate ...

Voltage Probe (VP-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the red and black leads properly and securely, according to the experimental setup. Secondary Test: If you suspect that the rea...

LabQuest App curve fit coefficients are computed in one of two ways. *** Linear form *** Linear: y = mx +b LabQuest App uses the same approach as Logger Pro. See: How do you calculate linear fits in Logger Pro? How do Logger Pro Curve fits work? *...

This article refers to the Inductor (IND). It also applies to the inductor installed on the Vernier Circuit Board 2 (VCB2). The resistance of the coil is less than 5 Ω. The inductor is rated at 200 W. The wire is 24 gauge copper wire. The...

Vernier Radiation Monitor (VRM-BTD) Specifications and User Guide Troubleshooting Primary Test: Connect the Radiation Monitor to an interface and launch the software (either the LabQuest App or Logger Pro on a computer)....

Below is a thorough list of Vernier equipment that supports AP Physics 1 and 2. Since no two physics instructors teach AP physics in exactly the same way, this list may not have everything needed or may include sensors that are not needed in your cu...

Vernier lab books contain dozens of experiments that meet the IB Physics standards; we have a list of correlations. The equipment listed below is based on the contents of our physics and chemistry lab books. You may want to add or remove items depend...

As described by on the IB website, among the IB Physics standards are several prescribed lab practicals. One or more of these lab practicals appear in questions in the Paper 3 external assessment. As such, it is important to plan around them. For mo...

Go Direct® Current Probe (GDX-CUR) Specifications and User Guide Troubleshooting Primary Test: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for yo...

You should consult with Vernier Technical Support at 1-888-837-6437 and receive an RMA email, before sending the unit in for repair. In most cases you will only need to send in the main body of the unit as shown below. This is true if you need servi...