...titled “Interfacing VIs for Vernier Biosensors”. If you run the example with our temperature sensor connected via the BTA-ELV adapter the readings will be off. The problem is that the......
Tech Support Search
Yes. If you have an older edition of a Vernier lab book that only has procedures using the Dissolved Oxygen Probe (DO-BTA), you can access the most up-to-date version of......
LEGO® Mindstorms® EV3 units are able to work with Vernier sensors using our LEGO Sensor Adapter for EV3 and NXT (order code: BTA-NXT, $39) and the EV3 “block,” which can......
This article is for the Wired (BTA) Optical DO Probe. For the Go Direct Optical Dissolved Oxygen Probe, see How do I replace a cap on the Go Direct Optical......
...its acceleration. When doing a Half-Atwood experiment, it may seem natural to use a Dual-Range Force Sensor (DFS-BTA) to measure force and a Low-g Accelerometer (LGA-BTA) to measure acceleration (or......
...head can be replaced. Please contact Vernier at physiology@vernier.com for more information. The Flow Head of the Spirometer (SPR-BTA) can be removed and sterilized. Please see instructions below. A bacterial......
Yes, you will need our Instrumentation Amplifier (INA-BTA), one of our interfaces, and our Logger Pro software. Almost any laboratory instrument that has an output designed to interface with a......
...DO Probe booklet that came with the sensor (or found online at www.vernier.com/do-bta If the calibration procedure is followed carefully, the readings from the Dissolved Oxygen Probe are as accurate,......
The plastic tubing we ship with the Gas Pressure Sensor (GPS-BTA) and the Go Direct® Gas Pressure Sensor (GDX-GP) can be purchased from us: Plastic Tubing (PS-TUBING) Its inside diameter......
This is associated with the original version of Force Plate (FP-BTA) shipped before November 10, 2023. The redesigned Force Plate Handles (FP-HAN) will work with both versions of the Force......