The Power Amplifier has two control inputs:
-The BTA input is used for CH4 from LabPro
-The mini-audio input is used for LabQuest.
The LabQuest input overrides the LabPro input, so that if the audio cable is left connected to the Power Amplifier, th...
Tech Support Search
Yes, you can use cuff pressure data to determine blood pressure. Both the Go Direct® Blood Pressure Sensor (GDX-BP) and the Blood Pressure Sensor (BPS-BTA) use the oscillometric method for calculating parameters. See the sensor booklets of each s...
The Tris-Compatible Flat pH Sensor (FPH-BTA) is made of an electrode connected to an Electrode Amplifier (EA-BTA). These special Electrode Amplifiers have been burned so that they default to Page 1 and therefore auto-ID as pH instead of mV. If a unit...
Tris-Compatible Flat pH Sensor (FPH-BTA)
Specifications and User Guide
Which model pH sensor do I have? (How old is my pH sensor?)
Troubleshooting
Primary Test: Does it read approximately 4 in its storage solution? (pH 1...
Melt Station (MLT-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Power the Melt Station using its AC adapter. Connect the Melt Station's BTA plug to a data collection interface. Run the data collection s...
We do not maintain a list of chemicals specifically damaging to the sensing unit. It is not designed to come into contact with liquids.
We assume that aqueous solutions will not be allowed to enter the sensor and that discretion would be used whe...
The calibration information is dependent on the type of transducer used in the Gas Pressure Sensor (GPS-BTA), which changed with an update to the sensor starting in October 2011. The new calibration has different slope and intercept values.
Gas...
This information pertains to LabQuest 2 and LabQuest 3.
If you have an original LabQuest, see this article.
The combination of an older version of Microphone (MCA-BTA) (shipped before August 2013), and LabQuest 2 (LABQ2) or LabQuest 3 (LABQ3), wil...
Exercise Heart Rate Monitor (EHR-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Snap the module into place on the strap. Place the strap with the module in place on the subject. If the strap is not in contac...
National Instruments has posted an example LabVIEW VI for using a Vernier temperature sensor with NI ELVIS. The example is currently posted in the NI Developer Zone with an article titled "Interfacing VIs for Vernier Biosensors". If you run the examp...