The plastic tubing we ship with the Gas Pressure Sensor (GPS-BTA) and the Go Direct® Gas Pressure Sensor (GDX-GP) can be purchased from us: Plastic Tubing (PS-TUBING) Its inside diameter is 1/8 in and wall thickness is 1/16 in...

The input impedences of our voltage probes are all listed on in the LabPro Technical Reference Manual. For a normal VP-BTA voltage probe used with LabPro: Input impedance: +/-10V input 1MΩ Note that if one was to use a VP-DIN on a LabPro...

This is associated with the original version of Force Plate (FP-BTA) shipped before November 10, 2023. The redesigned Force Plate Handles (FP-HAN) will work with both versions of the Force Plate. On some units, the silver plate on the inside of the ...

In most cases, the Stainless Steel Temperature Probe will never need to be calibrated. It is calibrated extremely well before it ships. However, if the need arises to calibrate the sensor, and you are using Logger Pro 3.3 or newer, the sensor can be ...

Colorimeter (COL-BTA) Specifications and User Guide What model Colorimeter do I have? Troubleshooting Primary Test: Connect the Colorimeter to a Vernier Interface. Allow the Colorimeter to warm up for 5 minutes. Place a ...

Salinity Sensor (SAL-BTA) Specifications and User Guide Troubleshooting Primary Test: Plug in the sensor and start up the data-collection program. Place the sensor in distilled water. The reading should be at or near 0 pp...

Turbidity Sensor (TRB-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the sensor to the Vernier interface and run the data-collection program. Fill the sample bottle to the top of the line on the ...

Flow Rate Sensor (FLO-BTA) Specifications and User Guide Troubleshooting Primary Test: Plug in the sensor and start up the data-collection program. Spin the impeller on the sensor and check the readings, which should be chang...

Relative Humidity Sensor (RH-BTA) Specifications and User Guide Troubleshooting Primary Test: Plug the sensor into an interface and run the data-collection program. Check the readings on the default screen. Move the s...

Spirometer (SPR-BTA) Specifications and User Guide Troubleshooting Primary Test: Connect the Spirometer to a Vernier interface (e.g., LabQuest, LabQuest Mini, or Go!Link). Launch the Data Collection software. Hold ...